How to Fix Netgear Nighthawk Router Orange Light?

There are many LEDs on the Netgear Nighthawk router which indicates different status of the router. Internet LED, WPS LED, Power LED, WiFi LED, Bands LED, and Ethernet LED are given on the device. But, here we will only discuss about only Nighthawk amber light. First let’s see its meaning and why it blinks:

Meaning: Usually power LED and Internet LED blinks or rings the Amber color light. When Power LED shows amber it means the router doesn’t booting properly. And when the Internet LED shows amber then it means connectivity is pretty weak.

Issues:

• Router does not boot properly
• Web interface is not accessible
• Power LED blinking for far too long
• Router not connecting to the internet
• DHCP address can’t be assigned to clients (other connected devices)

Now, let us help you fix this unusual problem (Netgear Nighthawk router orange light) related to booting and connectivity.

Fix Netgear Nighthawk Router Orange Light

Follow these solutions and tips to dispel the problem mentioned above.

Reboot Your Router

Basically, rebooting process is On and Off the device. It helps router to refresh up. To do that you can follow two methods;

• Find the power adapter connected to the wall socket and plug it out and plug it again to turn it on.
• Find the power button and press it once to turn the router off and twice for turn it on.

Check Power Adapter

You also should check the power adapter and cord, and if you find any damaged in it, then you must replace it straight away with a new. If you are using any other type of adapter other than Netgear, then you can also be trouble with mentioned problem.

Perform Factory Reset

The end tip and solution to make the Netgear Nighthawk orange light off is factory reset router device. Have a look at some steps to the reset the router;

• Find the router Reset button.
• Press and hold it for 5 seconds.
• Release it and reset process will start.

After that, you should complete Netgear router setup again via Nighthawk login using the URL routerlogin.net or IP address 192.168.1.1.

Update Firmware via TFTP

If the orange light is not turning off after applying all the tips and solutions, then you have to update your router. But if you can’t access the interface, how you will update the router? There is another way, which is firmware update through TFTP.

• Download and install the tftpd64 file in your computer.
• Download the ZIP firmware file from the NETGEAR Download Center.
• Extract the file to your desktop, and configure Tftpd64 to connect your router.
• Enter few details like IP address, ports and then click on the Next button.

The Conclusion

Here, you have seen and learned about Netgear Nighthawk Orange light meaning, issues and solutions to fix the light.