Why is My Nighthawk WiFi Extender Not Working? How to Fix?
Nighthawk WiFi extenders connect to routers to expand the WiFi coverage in the house. Moreover, one can connect more than 100 devices to the extender’s network after setting it up. But, if the Nighthawk WiFi extender not working issue appears, it can be troublesome. How to fix it? The same has been discussed in this post. Continue reading.
Reasons: Nighthawk WiFi Extender Not Working
Too many reasons are there due to which a Nighthawk extender fails to work. But, the most probable reason is the supply of improper power. Thus, ensure that the extender is getting a stable power supply and that the socket to which you have connected it is all well. The other reasons behind the problem are mentioned below:
- You have not established a connection between the extender and the host router
- The distance between your Nighthawk range extender and the main router is too much
- The extender’s signals are getting interrupted
- Glitches are affecting the functionality of the Nighthawk extender
Solutions: Nighthawk WiFi Extender Not Working
After learning the reasons causing the problem, it is now time to walk through the solutions that can be followed to get it resolved in a matter of minutes.
1. Connect the Extender and Router
The very first thing you can do to resolve the problem is to connect your Nighthawk range extender to the main router. You have 3 methods for that. The first one includes accessing the Nighthawk login page on a browser, second one is the WPS method whereas the third one makes the use of the Nighthawk app. You can pick the most convenient method.
2. Reduce the Extender-Router Gap
If the gap separating the extender and the router is found more than 10ft, it is recommended to reduce it. You must know that devices need to be in range to work and communicate effortlessly. However, ensure that the distance between the devices is not reduced to zero. This can result in a clash of WiFi signals of both devices.
3. Change the Location of the Extender
Have a look at the surroundings of your Nighthawk extender and see if it is placed near microwave ovens, televisions, refrigerators, Bluetooth speakers, washing machines, etc. If it is, then get the location changed instantly. Also, you need to be sure that the newly chosen location of your Nighthawk extender is away from objects containing a large amount of water and reflexive surfaces.
4. Reboot the Range Extender
Sometimes, the Nighthawk WiFi extender not working properly issue arises because of glitches. To get rid of these glitches, it is recommended that you power down the extender after disconnecting the devices connected to its network. Also, disconnect the extender from the router if you have used an Ethernet connection. Once done, wait for a few seconds. Lastly, reconnect the extender to the power outlet and see if starts working or not.
After walking through the above given tips, you will be able to resolve the issue. However, reset the extender to the default factory settings if you can’t make the extender work after a number of efforts.
The Conclusion
Fixing the Nighthawk WiFi extender not working issue requires a systematic approach. After rebooting the extender, placing it at an appropriate location, and bringing it closer to the router, you will be able to make it up and running. However, a factory reset is required if nothing works. Do not forget that the extender will lose its current configuration after the reset. Thus, you need to set it up again followed by the reset procedure.